Page 1 of 3

Altitude's RCT3 Project

Posted: Mon Apr 01, 2013 3:13 pm
by Altitude
Hi, I'm Altitude and I'm new here :D

The rumours were true, a new theme park is heading our way! My friend works in construction and happens to be working on the project right now!

The name of the park is not yet know, neither do I know what rides it will house. However my friend has taken a few pictures of some construction areas...

What looks to be an Intamin Halfpipe?
Image

Footers seem to be finished, apparently the pit will be filled with water upon completion...
Image

The weather took a British turn for the worst, so construction came to a halt that day...
Image

I hear the track for the coaster is late, so construction of the station building started early. Rumour also has it that this will be a new generation of Halfpipes, with rotating seats.

Feel free to comment, more updates soon! :)

Re: Altitude's RCT3 Project

Posted: Mon Apr 01, 2013 3:13 pm
by Altitude
Update- Construction seems to be booming right now!

Track has arrived and one side of the half pipe is almost fully built!
Image

Close up of track from inside the station building...
Image

Weather is turning again. Pieces of track waiting to be placed...
Image

And construction on the station and pit area is almost finished!
Image

Re: Altitude's RCT3 Project

Posted: Mon Apr 01, 2013 3:13 pm
by Altitude
The half pipe is complete!
Image

Image

These photos don't do the ride justice, apparently it's over 100ft tall!

Re: Altitude's RCT3 Project

Posted: Mon Apr 01, 2013 3:14 pm
by NickiFan
Awesome, Looks good!

Re: Altitude's RCT3 Project

Posted: Mon Apr 01, 2013 4:37 pm
by Altitude
^ Thanks, means a lot! :)

The plaza of the Halfpipe has been built!
Image

The station through the newly planted trees!
Image

Re: Altitude's RCT3 Project

Posted: Mon Apr 01, 2013 4:41 pm
by NickiFan
Omg! wow! what CS is that jeep? It looks brilliant.

Re: Altitude's RCT3 Project

Posted: Mon Apr 01, 2013 4:43 pm
by RollercoasterGEEK100
This is so inspiring!  :O  ;)

Re: Altitude's RCT3 Project

Posted: Mon Apr 01, 2013 4:43 pm
by Owen
And what CS is the footers

Re: Altitude's RCT3 Project

Posted: Mon Apr 01, 2013 5:36 pm
by Altitude
infusionfan2 wrote:
Omg! wow! what CS is that jeep? It looks brilliant.


The jeep and surrounding objects are from a set called 'Pat's Statues'.
As for the CS footers, I believe they are LoneWolf's Round Footers.

Update! The new S&S Screamin' Swing has been installed at the park, along with the queue line and plaza...
Image

The Intamin Ball Halfpipe is testing...
Image

And a mysterious new dark ride seems to be taking shape. Rumours say it will be an ABC drop tower...
Image

Image

Re: Altitude's RCT3 Project

Posted: Mon Apr 01, 2013 6:13 pm
by Owen
Not to be a pain but could you list all the custom content please [-o<

Re: Altitude's RCT3 Project

Posted: Mon Apr 01, 2013 6:15 pm
by Toborg123
Wow, really nice start! But what CFR will you use for an ABC drop tower? The plane out ofthe bushes is a really nice touch, but where did you get the plane from?

Re: Altitude's RCT3 Project

Posted: Mon Apr 01, 2013 6:47 pm
by Altitude
Hahaha, I love how most of the comments are about where to download things...

Toborg123 wrote:
Wow, really nice start! But what CFR will you use for an ABC drop tower? The plane out ofthe bushes is a really nice touch, but where did you get the plane from?


Thanks, I'll be using ImagineerJohn's smallest Spring Ride. As for the plane, it's from the same set as the jeep (read earlier post) :)

Thrillmad wrote:
Not to be a pain but could you list all the custom content please [-o<


From what I can recall...
-Pat's statues
-Dasmatze's Industry Age
-Revolutionary Rides Screamin' Swing
-Moby's Steel  Jungle
-Lonewolf's Round Footers
-ShyGuy's Planters
-Temple of Torment V1 (Not sure who made it)

Re: Altitude's RCT3 Project

Posted: Mon Apr 01, 2013 7:04 pm
by Owen
Altitude wrote:
Hahaha, I love how most of the comments are about where to download things...

Toborg123 wrote:
Wow, really nice start! But what CFR will you use for an ABC drop tower? The plane out ofthe bushes is a really nice touch, but where did you get the plane from?


Thanks, I'll be using ImagineerJohn's smallest Spring Ride. As for the plane, it's from the same set as the jeep (read earlier post) :)

Thrillmad wrote:
Not to be a pain but could you list all the custom content please [-o<


From what I can recall...
-Pat's statues
-Dasmatze's Industry Age
-Revolutionary Rides Screamin' Swing
-Moby's Steel  Jungle
-Lonewolf's Round Footers
-ShyGuy's Planters
-Temple of Torment V1 (Not sure who made it)

I'm really being a pain but what's
TOT V1
Shy guy planters
Industry age
Sorry

Re: Altitude's RCT3 Project

Posted: Mon Apr 01, 2013 7:12 pm
by Altitude
You asked for the custom content, and those are the names of CS sets...

Re: Altitude's RCT3 Project

Posted: Mon Apr 01, 2013 7:15 pm
by Owen
Altitude wrote:
You asked for the custom content, and those are the names of CS sets...

Yes but what are they like what do you get?

Re: Altitude's RCT3 Project

Posted: Mon Apr 01, 2013 7:17 pm
by Altitude
PM me...

Re: Altitude's RCT3 Project

Posted: Mon Apr 01, 2013 7:50 pm
by Altitude
Update! The dark ride has been fully built! From the outside it looks like it's themed to a forbidden building...
Image

Image

My friend has managed to snap some pictures of the park's signature attraction, a B&M Wing Coaster. From these pictures, it's clear the first drop will also be an inversion!

Image

Image

Image

There will be another Wing Coaster construction update later tonight!

Re: Altitude's RCT3 Project

Posted: Mon Apr 01, 2013 8:57 pm
by NickiFan
awesome! I love it!

Re: Altitude's RCT3 Project

Posted: Mon Apr 01, 2013 10:18 pm
by Altitude
Thanks :)

The first drop is pretty much done!

Image

Image

Re: Altitude's RCT3 Project

Posted: Mon Apr 01, 2013 10:34 pm
by RollercoasterGEEK100
Well done, keep up the good work, never forget a park needs a B&M invert too...  ;)