I thought I had a topic for this already, turns out I didn't. This topic is for my own designs. Starting with Jet Rescue. An old project of mine that I've managed to recover and am currently in the process of improving. Let me know what you think!
-Dan
*WARNING* Picture heavy topic, this post particularly.
First launch into a series of overbanked turns

Second launch into a large corkscrew (Helix style)

Leaving the first inversion

Vertical loop followed by a heavily banked turn/dive

Twisted airtime hill after a tunnel

Another tunnel precedes this partially underground helix

Third launch leads directly into an airtime hill

Twisted hill followed by an Immelmann inversion

Another twisted airtime hill after the Immelmann

A high speed turn leads into another airtime hill followed by a zero G roll

The Zero G roll dives towards the water, quickly rising up into a brake run. The train exits this and spirals round into a drop that will have a wooden building constructed around the bottom of it.

Leading up from the drop is a series of twists and turns, interrupted only by a corkscrew that provides rides with a short moment of hangtime.

The turns lead into a moment where riders are at an elevated level, which doesn't last long due to a sharp drop towards the water.

From that drop a splashdown is simulated by water jets as the train navigates a gentle but high speed curve just above the water's surface.

Finally riders return to the ground as they jump up into the final brake run and back to the station.

And to finish off with, an overhead shot of the whole ride.
